3-axle platform semitrailer – building materials

Product benefits and optional extras

Reinforced frame construction for 20 t point load over 4 m at centre of gravity
Reinforced aluminium hollow profile front wall with integrated equipment bracket
Aluminium hollow profile rear wall, internally riveted frame, foldable, with Kinnegrip double locking
Aluminium hollow profile side walls, with Kinnegrip double locking
Installation of axles from well-known manufacturers such as SAF or BPW
OPTIONAL: Cement cover consisting of roof arches inserted directly into the central and rear corner posts
OPTIONAL: RULASI = post-based load securing system with various rack positions
OPTIONAL: Reinforced body with load securing certified according to DIN EN 12642 Code XL
OPTIONAL: Weather-resistant larch or hardwood floor, 40 mm, lengthwise, without secondary floor
OPTIONAL: Anodised aluminium stacker protection strips on both sides of external frame
OPTIONAL: Perforated external frame with approx. 100 mm hole spacing, 50/30 mm slot, for securing 2 t per lashing point

Vehicle details

TYPE DESIGNATION

3-AXLE PLATFORM SEMITRAILER RH125 P - BUILDING MATERIALS

WEIGHTS

Gross train weight (perm.): 40 t Gross weight (techn.): 39 t Axle assembly load (techn.): 27 t Fifth-wheel load (techn.): 12 t Tare weight: approx. 5. 6 t

DIMENSIONS

Internal platform length: approx. 13,620 mm Internal platform width: approx. 2,480 mm Total width: 2,550 mm Loading height: approx. 125 mm over fifth-wheel height

FRAME

Welded steel frame construction, reinforced for 2 0 t point load over 4 m at centre of mass Frame for unladen fifth-wheel height of 1,150 - 1,220 mm with air-sprung STT Replaceable 2" kingpin (EC installation dimension, width across corners: 2,040 mm) 23 pairs of recessed 2.5 t lashing points according to UVV

CHASSIS

Air suspension with lifting and lowering device (approx. +120/-80 mm) Automatic adjustment of driving level from 15 km/h Air suspension unit with low-maintenance 430 mm disc brake axles, 3 x 9 t rigid, wheelbase 2 x 1,310 mm Tyres : 6 x 385/65 R 22.5 160J, manufacturer as per factory specifications 6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver

SUPPORT FIXTURES

Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation, manufacturer as per factory specifications

BRAKE SYSTEM

Brake system according to EC Directive 71/320 or ECE R13 Two-line brake EBS - electronic brake system Wabco 2S2M = one axle sensed RSS - stability program Spring-loaded parking brake on 2 axles Steel air tank

FLOOR

Reinforced body design in accordance with DIN EN 12642 Code XL load securing certificate Resin-coated plywood floor, 27 mm, flush with external frame 2 steel top-hat rails over the longitudinal beams (floor load capacity 7 t, stacker axle load according to CSC)

SIDE WALLS

Fixed aluminium hollow profile front wall, 1,200 mm, with 2 centre supports, 2 lashing rings inside for load securing Front wall reinforced inside with galvanised steel plate, approx. 650 mm high 4-part aluminium hollow profile side walls, 1,000/25 mm, with vertical and horizontal rubber seal and internally riveted frame, foldable with Kinnegrip double locking Foldable aluminium hollow profile rear wall, 1,000 mm high, with vertical and horizontal rubber seal and internally riveted frame, foldable with Kinnegrip double locking 2 folding steps

ELECTRICAL EQUIPMENT

24 V lighting system according to EC Directive 76/756/EWG 2 seven-chamber tail lights in underride protection LED side marker lights 2 clearance lamps 2 contour lights on underride protection 2 x 7-pin and 1 x 15-pin socket

PAINTWORK

Blasted with steel granulate, treated with zinc dust primer and spray painted with 2-component acrylic paints for commercial vehicles (standard RAL or truck colour) Plastic and hot-dip galvanised parts unpainted, powder-coated attachments/installation parts black Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

ACCESSORIES

Rear markings as per ECE standards (horizontal on rear doors/rear wall)

ATTACHMENTS

Aluminium crash guard across rear Wheel chock(s) as per regulations Single wheel plastic mudguards with spray protection as per regulations Aluminium underride protection, coated white Side impact protection made from aluminium profiles as per regulations, coated black 1 spare wheel bracket for 1 spare wheel (rear right) 1 plastic toolbox, lockable, unpainted , on left after axle

POSTS

Integrated extended lever locks, Kinnegrip system 2 front corner posts, bolted, protruding from sides, in front wall height 6 Kinnegrip centre posts, foldable and removable, in side wall height 2 rear Kinnegrip corner posts, foldable and removable, side-mounted, in side wall height

Impressions

Reinforced body design with load securing certificate in accordance with DIN EN 12642 Code XL

Reinforced frame design for point loading 20 t on 4 m in the centre of gravity

Fixed aluminium hollow profile front wall with 2 centre supports, inside with 2 lashing eyes for load securing and reinforced with steel sheet

Foldable aluminium hollow profile rear wall, with rubber seals on the horizontal and vertical planes

OPTIONAL: Cement cover - 4 roof arches directly inserted into the central and rear corner posts and 1 central row of roof planks (roof inclination 500 mm)