2-axle timber/stanchion trailer – with platform
Product benefits and optional extras
- Lightweight frame made from special high-strength NAXTRA steel
- ExTe stanchion pockets with reinforcement brackets incl. 2-part ExTe stanchions 144-S with bolt fastening (load capacity: 7 t/pair)
- Steel stud plate floor, 5/7 mm, tack-welded
- Air suspension unit in off-road design
- Installation of axles from well-known manufacturers such as SAF or BPW
- OPTIONAL: Autonordic heavy-duty band winch with 10 m belt incl. triangle and clamp
- OPTIONAL: 20 t total weight with 2 x 10 t air-sprung axles and twin tyres
- OPTIONAL: Mudguard easily removable with spring compressor, for simple snow chain application
- OPTIONAL: Fixed crane bracket at front, incl. bogie fixation
- OPTIONAL: ExTe stanchions 144-SV with quick-release fasteners
- OPTIONAL: SmartBoard for reading data on vehicle display (mileage, axle assembly load, brake diagnostics etc.)
Vehicle details
TYPE DESIGNATION
- 2-AXLE STANCHION PLATFORM TRAILER
WEIGHTS
- Gross weight (techn.): 18 t
- Tare weight: approx. 4.1 t
DIMENSIONS
- Platform length: approx. 6,500 mm
- Total width: 2,550 mm
- Loading height, unladen: approx. 1,380 mm
FRAME
- Naxtra welded steel frame construction
- Reinforced external lashing frame, 5 mm
- Low-maintenance ball bearing turntable
- 11 pairs of recessed 4 t lashing points
CHASSIS
- Air suspension without lifting and lowering device,
- bellow diameter 360 mm
- Low-maintenance air-sprung axles, each with 9 t axle load
- S-cam brake 420/180 mm, autom. brake linkage adjuster
- Reinforced axle beam (off-road version)
- Tyres:
- 4 x 385/65 R 22.5 160J, manufacturer as per factory specifications
- 4 steel wheel rims 11.75 x 22.5, 10-hole, without rim offset, silver
DRAWGEAR
- Fixed drawbar, 40 mm drawbar eye, brought together at the front (Y design),
- with silent bushing and mechanical fork lock
BRAKE SYSTEM
- Brake system according to EC Directive 71/320 or ECE R13
- Two-line brake
- EBS
- Wabco 4S3M = both axles sensed
- RSS - stability program
- Spring-loaded parking brake on 2nd axle
FLOOR
- Steel stud plate, 5/7 mm, tack-welded
ELECTRICAL EQUIPMENT
- 24 V lighting system according to EC Directive 76/756/EEC
- 2 seven-chamber tail lights in underride protection
- LED side marker lights
- 2 clearance lamps
- 2 contour lights
- Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector
PAINTWORK
- Blasted with steel granulate, treated with zinc dust primer and spray painted
- 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
- Stanchions in original orange signal colour
- Plastic and hot-dip galvanised parts unpainted,
- powder-coated attachments/installation parts black
- Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48
ACCESSORIES
- Rear markings as per ECE standards
ATTACHMENTS
- Wheel chock(s) as per regulations
- Plastic mudguards with spray protection as per regulations (non-removable)
- Aluminium underride protection, coated white
- "Schwarzmüller" rubber apron on the underride protection, over the entire width
- Side impact protection made from aluminium profiles as per regulations, coated black
STANCHIONS
- 4 recessed stanchion pockets on both left and right incl. reinforcement brackets
- 4 pairs of 2-part ExTe stanchions 144-S with bolt fastening, load height:
- max. 2,800 mm, load capacity of stanchions: max. 7 t per pair (minimal
- stanchion inclination inwards)
- Distribution: approx. 790 mm from front, then approx. 1,640 mm, approx. 1,640 mm, approx. 1,640 mm
Your Schwarzmüller contacts
Always close to you. We are here for you.
Premium customer service, too
From maintenance to rental vehicles
Schwarzmüller Service App
Rely on our top services – also mobile. The app serves as a helper in an emergency in the event of a breakdown and is even available offline.
