3-axle jumbo sliding tarpaulin platform trailer
Product benefits and optional extras
- Low corrosion, high-quality aluminium body components, tested according to EN12642 Code XL
- Reinforced aluminium hollow profile front wall with integrated equipment bracket
- Bolted portal at rear with aluminium corner posts and fully opening double door in profile design
- External frame with 15 pairs of recessed 2.5 t lashing points for load securing
- Double floor consisting of subfloor with integrated steel omega profiles beneath resin-coated wear floor
- Additional protection in the form of aluminium combination bumper strip, bolted on both sides, with integrated tarpaulin mounting and pole fixation
- Installation of axles from well-known manufacturers such as SAF or BPW
- OPTIONAL: Version with sliding tarpaulin + side walls
- OPTIONAL: Pull-out drawbar, max. 600 mm adjustment, with Getofix drawbar support
- OPTIONAL: Variable load securing via bolt-on lashing systems (airline lashing rail, perforated combination impact protection)
- OPTIONAL: Manually operated hydraulic lifting roof, 400 mm elevation for rapid loading and unloading
Vehicle details
TYPE DESIGNATION
- 3-AXLE JUMBO SLIDING TARPAULIN PLATFORM TRAILER
WEIGHTS
- Gross weight (techn.): 27 t
- Gross weight (perm.): 24 t
- Tare weight: approx. 5. 1 t
DIMENSIONS
- Internal platform length: approx. 8,500 mm
- Internal platform width: approx. 2,480 mm
- Total width: 2,550 mm
- Load space internal height: approx. 2,950 mm
- Lateral loading height below guide rail: approx. 2,860 mm
- Internal width between guide rails: approx. 2,430 mm
- Portal loading height: approx. 2,860 mm
- Portal loading width: approx. 2,480 mm
- Loading height, unladen approx. 1, 01 0 mm,
- clearance between tyres and frame at front approx. 9 0 mm
- Frame height at front approx. 105 mm
FRAME
- Welded steel frame construction
- 15 pairs of recessed 2.5 t lashing points according to UVV
CHASSIS
- Air suspension without lifting and lowering device
- Low-maintenance air-sprung low-loader axles, each with 9 t axle load
- S-cam brake 300/200 mm, autom. brake linkage adjuster
- Tyres :
- 12 x 235/75 R 17.5 141J, manufacturer as per factory specifications
- 12 steel wheel rims, 10-hole, with rim offset, silver
BRAKE SYSTEM
- Brake system according to EC Directive 71/320 or ECE R13
- Two-line brake
- EBS
- Wabco 4S3M = 1st and 3rd axles sensed
- RSS - stability program
- Spring-loaded parking brake on 2nd and 3rd axles
- Steel air tank
FLOOR
- Spruce subfloor, 30 mm, lengthwise
- Galvanised steel omega profiles in subfloor
- Secondary floor made from resin-coated birch plywood, 9 mm, flush with external frame
- (floor load capacity: 5,460 kg stacker axle load acc. to CSC)
ELECTRICAL EQUIPMENT
- 24 V lighting system according to EC Directive 76/756/EWG
- 2 seven-chamber tail lights in underride protection
- LED side marker lights
- 2 clearance lamps
- 2 contour lights on underride protection
- Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector
PAINTWORK
- Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
- Plastic and hot-dip galvanised parts unpainted,
- powder-coated attachments/installation parts black
- Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48
ACCESSORIES
- Rear markings as per ECE standards
ATTACHMENTS
- Rear crash guard with portal post protection and lower post reinforcement
- Wheel chock(s) as per regulations
- 1 x retractable step unit at rear right
- Single wheel plastic mudguards with spray protection as per regulations
- Aluminium combination bumper strip, bolted on both sides, for tarpaulin mounting and slat fixation
- Aluminium underride protection, coated white
- Side impact protection made from aluminium profiles as per regulations, coated black
- 1 spare wheel bracket for 1 spare wheel
SIDE WALLS/SLIDING TARPAULIN
- Fixed aluminium hollow profile front wall, 2,550 mm, with 2 centre supports,
- 2 lashing rings inside for load securing
- Closed with tarpaulin over front wall, in same colour as side tarpaulin
- Front wall reinforced inside with 3/5 mm aluminium chequer plate, approx. 650 mm high
- Plastic sliding tarpaulins on both sides with load certification according to Code XL; welded horizontal and vertical strap reinforcements incl. turnbuckles as well as front and rear bolt locks, openable on all 4 corners, with ratchet tensioner at front and rear
- tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability
- Plastic tarpaulin roof, translucent = white
- Bolted portal at rear with aluminium corner posts, upper crossbeam with forward-sliding Edscha cover, incl. fully opening double door in tubular design covering entire load space height, each leaf equipped with 2 internal espagnolettes
POSTS/COVER
- 2 fixed aluminium corner posts at front, bolted, protruding approx. 95 mm from sides
- 2 centre posts on left in direction of travel, movable across entire length
- 2 centre posts on right in direction of travel, movable across entire length
- 4 rows of slat pockets, 1st pocket row at bottom 460 mm,
- spacing approx. 160/600/600 mm, with 4 rows of aluminium slats 100/25 mm
- Edscha sliding cover frame with plastic brackets, forward-sliding with automatic elevation, limited backward movement (opened from above) = pushed together in loading area, with vertical and horizontal guide rollers = smooth operation
- Aluminium guide rail profile on both sides for sliding tarpaulins and posts,
- design height 125 mm, or approx. 140 mm with plastic sealing lip bent upwards
DRAWGEAR
- Fixed drawbar , 40 mm drawbar eye , with silent bushing
Your Schwarzmüller contacts
Always close to you. We are here for you.
Premium customer service, too
From maintenance to rental vehicles
Schwarzmüller Service App
Rely on our top services – also mobile. The app serves as a helper in an emergency in the event of a breakdown and is even available offline.
