2-axle low-loader trailer with straight platform
Product benefits and optional extras
- High point loading due to narrow cross member spacing
- Waterproofed softwood floor, protruding beyond frame profiles
- 2 pairs of recessed foldable lashing rings
- 4 pairs of lashing points on external frame
- Installation of axles from well-known manufacturers such as SAF or BPW
- OPTIONAL: Foldable, pivoting extensions, incl. extension planks for transporting wide loads
- OPTIONAL: Offset drawbar with pivoting eye 40 + 50 mm
- OPTIONAL: Version with side walls
- OPTIONAL: 2-part loading ramps with motor-hydraulic ramp actuators
- OPTIONAL: Ramps with hydraulic lateral movement, operated on semitrailer
- OPTIONAL: Plug-in retaining rails
Vehicle details
TYPE DESIGNATION
- 2-AXLE LOW LOADER TRAILER - TYPE TÜP
WEIGHTS
- Gross weight (techn.): 20 t
- Payload: approx. 15.6 t
- Gross weight (perm.): 18 t
- Tare weight: approx. 4. 3 t
DIMENSIONS
- Approx. 5,000 mm = drop-deck platform - flat load surface
- Approx. 1,000 mm = rear access slope
- Total width: 2,550 mm
- Loading height, laden: approx. 950 mm
FRAME
- Welded steel construction without front frame offset or body offset
- and drive-on taper at rear
- 4 pairs of lashing points under external frame
- 2 pairs of recessed foldable 5 t lashing rings in floor (10 t techn. tensile strength)
CHASSIS
- Reinforced, maintenance-free parabolic springs
- Low-loader axles, each with 11 t axle load
- S-cam brake 300/200 mm, autom. brake linkage adjuster
- Tyres :
- 8 x 2 4 5/7 0 R 17.5 14 3 J, manufacturer as per factory specifications
- 8 steel wheel rims 6.75 x 17.5, 10-hole, with rim offset, silver
BRAKE SYSTEM
- Brake system according to EC Directive 71/320 or EC E R13
- Two-line brake
- EBS - electronic brake system
- Wabco 4S3M = both axles sensed
- Spring-loaded parking brake on 2nd axle
- Steel air tank
FLOOR
- Softwood floor 50 mm, waterproofed, protruding approx. 5 - 10 mm beyond frame
- profiles
RAMPS
- 2 foldable, 1-part loading ramps, approx. 2,800/710 mm, with hardwood flooring
- Ramp width manually adjustable by approx. 550 mm, with rod,
- (min. spacing approx. 295 mm up to max. total width of 2,815 mm)
- lockable in driving position using chains with turnbuckle
- 2 autom. folding supports at rear
- Lifting aid with coil spring
ELECTRICAL EQUIPMENT
- 24 V lighting system according to EC Directive 76/756/E WG
- 2 five-chamber tail lights on ramps
- LED side marker lights
- 2 clearance lamps
- 2 contour lights
- Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector
PAINTWORK
- Blasted with steel granulate, treated with zinc dust primer and spray painted
- 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
- Plastic and hot-dip galvanised parts (extensions etc.) unpainted,
- powder-coated attachments/installation parts and drawbar black
- Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48
ACCESSORIES
- Rear markings as per ECE standards
ATTACHMENTS
- Wheel chock(s) as per regulations
- Plastic mudguards or splashguards with spray protection as per regulations
- Side impact protection
- Spare wheel well for 1 spare wheel
- Centre of gravity marking
DRAWGEAR
- Fixed drawbar, 1,900 mm long, 40 mm drawbar eye, 5° angle,
- with silent bushing
- truck superstructure up to 550 mm
- Truck coupling height, unladen: approx. 850 - 900 mm
Impressions
2-axle low loader trailer with straight platform
Version with side walls
Your Schwarzmüller contacts
Always close to you. We are here for you.
Premium customer service, too
From maintenance to rental vehicles
Schwarzmüller Service App
Rely on our top services – also mobile. The app serves as a helper in an emergency in the event of a breakdown and is even available offline.
