3-axle platform semitrailer – extendible

Product benefits and optional extras

Pull-out, 6,000 mm lightweight frame for transporting long materials up to 22 m
Torsionally rigid, pull-out welded steel frame structure with 7-point pneum. locking on semitrailer
Rear pull-out frame, 1,500 mm, in form of light carrier with limited load bearing capacity
3rd axle in form of steering knuckle/friction-steered trailing axle incl. reverse gear interlock
Installation of axles from well-known manufacturers such as SAF or BPW
OPTIONAL: Perforated external frame with approx. 100 mm hole spacing, 50/30 mm slot, for securing 2 t per lashing point
OPTIONAL: Rear pull-out frame, 2,500 mm, load capacity up to approx. 2 t
OPTIONAL: RULASI = post-based load securing system with various rack positions
OPTIONAL: Hydraulic forced steering = steering knuckle trailing axles, via fifth-wheel coupling with steering wedge and ball bearing turntable
OPTIONAL: Steel plate squared timber box for 20 lengths of 80 x 80 mm squared timber, with access cover on both sides

Vehicle details

Lightweight welded steel frame construction -
extendible up to 6,000 mm at spacing of
approx. 1,100/2,100/2,600/3,600/4,000/5,000 and 6,000 mm
Pneum. locking with operation on trailer - without intermediate support
Rearward extending frame = non-load-bearing light carriers,
extendible up to 1,500 mm, lockable every 500 mm
Frame for unladen fifth-wheel height of 1,150-1,250 mm with air-sprung STT (note total height)

Air suspension with lifting and lowering device (approx. +120/-80 mm)
Automatic adjustment of driving level from 15 km/h
air suspension unit with low-maintenance 430 mm disc brake axles, 3 x 9 t, wheelbase 1,310 + 1,410 mm
1st and 2nd axles rigid
3rd axle in form of steering knuckle/friction-steered trailing axle (12Â° steering angle) incl. electropneum. reverse gear interlock with autom. activation via reverse gear, also with switch activation in cab and operation on trailer
Tyres :
6 x 385/65 R 22.5 160J, manufacturer as per factory specifications
6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver

Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation, manufacturer as per factory specifications

Spruce softwood floor, 30 mm, lengthwise with aluminium omega profiles
Secondary floor made from resin-coated birch plywood, 9 mm, flush with external frame

Fixed aluminium hollow profile front wall, 1,700 mm, with 2 centre supports,
2 lashing rings inside for load securing
Front wall reinforced inside with galvanised steel plate, approx. 650 mm high
4-part aluminium hollow profile side walls, 800/25 mm (1-part at front, 3-part at rear), with rubber seal and bracket recess for tarpaulin overhang (360 mm), customs-compliant with tarpaulin brackets, foldable with latch-type tension locks 681-S1
Foldable aluminium hollow profile rear wall, 800 mm high, with rubber seal and bracket recess, customs-compliant with tarpaulin brackets, with latch-type tension locks 681-S1
2 folding steps

2 front corner posts, bolted, protruding from sides, 2,000 mm high
8 foldable centre posts, split
2 rear corner posts, bolted to sides, 2,000 mm high
4 rows of softwood slot-in slats, 100/27 mm, in pockets, 200 mm spacing
1 slat at front
Edscha sliding tarpaulin frame, forward-sliding = pushed together
in loading area, design height 95 mm
Edscha control rod, adjustable (bracket on interior side protection)
Customs tarpaulin made from high-strength Trevira fabric with translucent roof, incl. tarpaulin rope and assembly,

Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
Plastic and hot-dip galvanised parts unpainted,
powder-coated attachments/installation parts black
Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

Rear crash guard
Side wall stop buffer
4 wheel chocks
Single wheel plastic mudguards with spray protection as per regulations
Aluminium underride protection, coated white
Side impact protection made from aluminium profiles as per regulations, coated black
1 spare wheel bracket for 1 spare wheel
1 plastic toolbox, lockable, unpainted

Impressions