Sliding tarpaulin platform body – medium series
Product benefits and optional extras
- Clamped/bolted subframe and cross members, hot-dip galvanised
- Bolted portal at rear with aluminium corner posts and fully opening double door in profile design
- External frame with 11 pairs of recessed lashing points for load securing
- Resin-coated plywood floor, 30 mm, for stacker axle loads up to 2.5 t
- Additional protection in the form of aluminium combination bumper strip, bolted on both sides, with integrated tarpaulin mounting and pole fixation
- Forward-sliding tarpaulin frame
- OPTIONAL: Version with sliding tarpaulin + side walls
- OPTIONAL: Vertical liftgate with upper extending flap, for distribution transport
Vehicle details
TYPE DESIGNATION
- SLIDING TARPAULIN PLATFORM BODY - UP TO 14 T TOTAL WEIGHT
WEIGHTS
- Body weight: approx. 1.4 t
DIMENSIONS
- Internal platform length: approx. 6,100 mm
- Internal platform width: approx. 2,480 mm
- Total width: 2,550 mm
- Load space internal height: approx. 2,200 mm
- Internal width between guide rails: approx. 2,460 mm, or approx. 2,380 mm for centre posts
- Portal loading width: approx. 2,480 mm
- Load space internal height, body height, loading height, total height etc. can only be checked
- and announced upon specification of the exact truck data
FRAME
- Clamped/bolted steel construction,
- with attached cross members - design height approx. 210 mm
- 11 pairs of recessed lashing points according to UVV
FLOOR
- Resin-coated birch plywood floor, 30 mm, flush with external frame
- (floor load capacity up to 2.5 t stacker axle load)
SIDE WALLS/SLIDING TARPAULIN
- Fixed aluminium hollow profile front wall in roof height, with 2 full-height centre supports
- Front wall reinforced inside with 3/5 mm aluminium chequer plate, approx. 650 mm high
- Plastic sliding tarpaulins on both sides with welded horizontal and vertical
- strap reinforcements incl. turnbuckles as well as front and rear bolt locks, with ratchet tensioner at rear and cam-type closure at front,
- i.e. openable on 4 corners.
- tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability
- Plastic tarpaulin roof, translucent = white
- Bolted portal at rear with aluminium corner posts, fixed upper crossbeam, incl. fully opening double door in profile design covering entire load space height, each leaf equipped with 1 internal espagnolette
POSTS/COVER
- 2 fixed aluminium corner posts at front, in roof height, bolted to front
- 2 centre posts in roof height, approx. 1,000 mm, movable
- 3 rows of 25 mm slat pockets, 1st pocket row at bottom 460 mm,
- then 2 x 100 mm, spacing approx. 160/450 mm,
- with 3 rows of aluminium slats 100/25 mm
- Fixed "Edscha ECO" tarpaulin roof with 30 mm cross bow, without inclination (no loading from above)
- Aluminium guide rail profile on both sides for sliding tarpaulins, design height 115 mm, or
- approx. 130 mm with plastic sealing lip bent upwards
PAINTWORK
- Blasted with steel granulate, treated with zinc dust primer and spray painted
- 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
- hot-dip galvanised - unpainted = subframe and cross members
- Plastic and hot-dip galvanised parts unpainted,
- powder-coated attachments black
- Reflective contour marking strips across entire length of sides (continuing onto truck cab) and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48
ACCESSORIES
- Rear markings as per ECE standards
ATTACHMENTS
- Rear crash guard
- Bracket for wheel chock(s)
- 1 x retractable step unit at rear right
- Aluminium combination bumper strip, bolted on both sides, for tarpaulin mounting and slat fixation
- Door stays
Impressions
Your Schwarzmüller contacts
Always close to you. We are here for you.
Premium customer service, too
From maintenance to rental vehicles
Schwarzmüller Service App
Rely on our top services – also mobile. The app serves as a helper in an emergency in the event of a breakdown and is even available offline.
