Fast-swap body system for tipper body – concrete mixer truck
Product benefits and optional extras
- Pneumatic lifting bellows for raising the entire body
- Optimum fixation of subframe to truck chassis via wedge hooks
- Front supports for quick and simple body replacement
- Rearward angled supports for secure body placement
- Special subframe construction for optimum attachment of body to truck chassis
- Guides, positioners and stops for safe and simple replacement
- OPTIONAL: Foldable and removable underride protection
Vehicle details
TYPE DESIGNATION
- AUTOMAT. PNEUMAT. FAST-SWAP TIPPER BODY WITH CONCRETE MIXER SWAP BODY
- Switch body incl. subframe (tipper body and mixer body)
FOR TIPPER BODY
- 3-axle truck with internal body dimension of 4,880 or 5,100 mm
- Fast-swap system for rapid, convenient and safe swapping of bodies, incl. subframe, in approx. 5 min.
- Body subframe attachment via solid, chamfered wedge hooks
- The truck is equipped with a pneumatically operated 4 or 6 t dual-link lifting and locking rocker, which
- automatically moves the body over a cross member welded to the subframe for locking/unlocking
- via the wedge hooks.
- The body is raised or lowered in a direct, mechan. linked sequence.
THE SWAP PROCESS IS FACILITATED BY
- positioners, guides and stops.
- This ensures safe, rapid changeover on firm, level surfaces without faults or operating errors.
- The top dead centre locking generated due to spring preload is further secured by means of an electr. acoustic warning system in the cab.
- The system is conveniently operated via a key switch valve in the cab.
- 1 set of HP couplings for tipper hydraulics, dry version
- 1 set of support leg pockets incl. plug-in support legs with feet for depositing empty body on level ground
FOR MIXER BODY
- SWAP BODY FOR A SUITABLE 6 TO 7 OR 8 TO 9 M³ CONCRETE MIXER TRUCK
- , delivered prepaid to body plant
- complete with accessories such as underride protection, mudguards incl. brackets, adapted subframe offset
- EDC control unit with cables routed to the front, plus pre-assembled and painted as normal
- Shortening of subframe at front to match front stop, allowing replacement with autom. pneum. swap system
- incl. solid wedge hooks and cross members
- Adaptation of supplied propshaft for hydraulic drive and of underride protection
- Delivery of 1 set of support leg pockets incl. plug-in tubular support legs with feet for depositing the empty
- mixer body, as well as conversion of propshaft for hydraulic drive with switch fuse, dynamically balanced
- and 1 quick-release propshaft claw coupling for engine output to be provided with truck,
- incl. dust protection,
- key and fitted suspension
- Connection of pre-fitted EDC control unit for engine start/stop and speed control with max. 15-pin connector + socket on console behind cab
- Spot repair of mixer paintwork at weld points
- 1 set of cross members for 2 pairs of chute brackets provided
Impressions
Fast-swap body system for 3-way tipper body / concrete mixer truck
Front supports for quick and simple body replacement
Rearward angled supports for secure body placement
Concrete mixer body in deactivated state
OPTIONAL: Foldable and removable underride protection
Your Schwarzmüller contacts
Always close to you. We are here for you.
Premium customer service, too
From maintenance to rental vehicles
Schwarzmüller Service App
Rely on our top services – also mobile. The app serves as a helper in an emergency in the event of a breakdown and is even available offline.
