2-axle sliding tarpaulin platform semitrailer

  • Low corrosion, high-quality aluminium body components, tested according to EN 12642 XL
  • Perforated external frame with approx. 100 mm hole spacing, 40/25 mm slot according to DIN EN 12640 and 23 pairs of recessed 2.5 t
  • Aluminium tarpaulin mounting strips on both sides of external frame
  • Reinforced aluminium hollow profile front wall with integrated equipment bracket
  • Bolted portal at rear with aluminium corner posts and fully opening double door in profile design
  • Installation of axles from well-known manufacturers such as SAF or BPW
  • OPTIONAL: Certified according to DC Directive 9.5, certified for beverages and barrel goods
  • OPTIONAL: Version with sliding tarpaulin + side walls
  • OPTIONAL: Variable load securing via bolt-on lashing systems (airline lashing rail, perforated combination impact protection)
  • OPTIONAL: Twin-level loading system CTD III for 11 x 3 EURO pallets, load capacity: 400 kg/pallet

TYPE DESIGNATION

  • 2-AXLE SLIDING TARPAULIN PLATFORM SEMITRAILER RH125 P

WEIGHTS

  • Gross train weight (perm.): 36 t
  • Gross weight (techn.): 30 t
  • Axle assembly load (techn.): 18 t
  • Fifth-wheel load (techn.): 12 t
  • Payload: approx. 23 - 24 t
  • Tare weight: approx. 5. 3 t

DIMENSIONS

  • Internal platform length: approx. 13,620 mm
  • Internal platform width: approx. 2,480 mm
  • Total width: 2,550 mm
  • Load space internal height: approx. 2,720 mm
  • Lateral loading height below guide rail: approx. 2,620 mm
  • Internal width between guide rails: approx. 2,430 mm
  • Portal loading height: approx. 2,620 mm
  • Portal loading width: approx. 2,480 mm
  • Loading height: approx. 125 mm over fifth-wheel height

FRAME

  • Welded steel frame construction
  • Frame for unladen fifth-wheel height of 1,090 - 1,190 mm with air-sprung STT
  • Replaceable 2" kingpin (EC installation dimension,
  • width across corners: 2,040 mm)

CHASSIS

  • Air suspension with lifting and lowering device (approx. +120/-80 mm)
  • Automatic adjustment of driving level from 15 km/h
  • air suspension unit with low-maintenance 430 mm disc brake axles
  • 2 x 9 t rigid, wheelbase 1,310 mm
  • Tyres :
  • 4 x 385/65 R 22.5 160J, manufacturer as per factory specifications
  • 4 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver

SUPPORT FIXTURES

  • Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation, manufacturer as per factory specifications

BRAKE SYSTEM

  • Brake system according to EC Directive 71/320 or ECE R13
  • Two-line brake
  • EBS - electronic brake system
  • Wabco 2S2M = one axle sensed
  • RSS - stability program
  • Spring-loaded parking brake on 2 axles
  • Steel air tank

FLOOR

  • Resin-coated plywood floor, 27 mm, flush with external frame
  • 2 steel top-hat rails over the longitudinal beams
  • (floor load capacity 7 t, stacker axle load according to CSC)

ELECTRICAL EQUIPMENT

  • 24 V lighting system according to EC Directive 76/756/EWG
  • 2 seven-chamber tail lights in underride protection
  • LED side marker lights
  • 2 clearance lamps
  • 2 contour lights on underride protection
  • 2 x 7-pin and 1 x 15-pin socket

PAINTWORK

  • Blasted with steel granulate, treated with zinc dust primer and spray painted with 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
  • Plastic and hot-dip galvanised parts unpainted,
  • powder-coated attachments/installation parts black
  • Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

ACCESSORIES

  • Rear markings as per ECE standards (horizontal on rear doors/rear wall)

ATTACHMENTS

  • Rear crash guard with portal post protection and lower post reinforcement
  • Wheel chock(s) as per regulations
  • 1 x retractable step unit at rear right
  • Single wheel plastic mudguards with spray protection as per regulations
  • Aluminium tarpaulin mounting strips bolted on both sides of external frame.
  • Aluminium underride protection, coated white
  • Side impact protection made from aluminium profiles as per regulations, coated black
  • 1 spare wheel bracket for 1 spare wheel (rear right)
  • 1 plastic toolbox, lockable, unpainted , on left after axle

SIDE WALLS/SLIDING TARPAULIN

  • Fixed aluminium hollow profile front wall, 2,400 mm, with 2 centre supports,
  • 2 lashing rings inside for load securing
  • Closed with tarpaulin over front wall, in same colour as side tarpaulin
  • Front wall reinforced inside with galvanised steel plate,
  • approx. 650 mm high
  • Plastic sliding tarpaulins on both sides with load certification according to Code XL; welded horizontal and vertical strap reinforcements incl. turnbuckles as well as front and rear bolt locks, openable on all 4 corners, with ratchet tensioner at rear,
  • t arpaulin sealed against external frame ,
  • tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability
  • Aramid-reinforced plastic roof tarpaulin, translucent

POSTS/COVER

  • 2 fixed aluminium corner posts at front, bolted, protruding from sides
  • 3 centre posts on left in direction of travel, movable across entire length
  • 3 centre posts on right in direction of travel, movable across entire length
  • 4 rows of slat pockets, 1st pocket row at bottom 460 mm, spacing approx. 160/450/450 mm, with 4 rows of aluminium pointed slats 100/25 mm
  • Versus sliding cover with plastic brackets, forward-sliding with automatic elevation, limited backward movement (opened from above) = pushed together in loading area, with vertical and horizontal guide rollers = smooth operation
  • Aluminium guide rail profile on both sides for sliding tarpaulins and posts, design height 140 mm
  • Control rod for sliding tarpaulin (bracket on interior side protection)
Low corrosion, high-quality aluminium body components, tested according to EN 13642 XL

Low corrosion, high-quality aluminium body components, tested according to EN 13642 XL

OPTIONAL: Version with sliding tarpaulin + side walls

OPTIONAL: Version with sliding tarpaulin + side walls

Reinforced aluminium hollow profile front wall with integrated equipment bracket

Reinforced aluminium hollow profile front wall with integrated equipment bracket

Bolted portal at rear with aluminium corner posts and fully opening double door in profile design

Bolted portal at rear with aluminium corner posts and fully opening double door in profile design

Perforated external frame with approx. 100 mm hole spacing, 40/25 mm slot according to DIN EN 12640 and 23 pairs of recessed 2.5 t

Perforated external frame with approx. 100 mm hole spacing, 40/25 mm slot according to DIN EN 12640 and 23 pairs of recessed 2.5 t

27-mm resin-coated panel floor, flush with external frame and with 2 steel top-hat profile rails above the side members (stacker axle load 7 t)

27-mm resin-coated panel floor, flush with external frame and with 2 steel top-hat profile rails above the side members (stacker axle load 7 t)

OPTIONAL: Twin-level loading system CTD III for 11 x 3 EURO pallets, load capacity: 400 kg/pallet

OPTIONAL: Twin-level loading system CTD III for 11 x 3 EURO pallets, load capacity: 400 kg/pallet

OPTIONAL: Manually operated hydraulic lifting roof, 400 mm elevation for rapid loading and unloading

OPTIONAL: Manually operated hydraulic lifting roof, 400 mm elevation for rapid loading and unloading

back to the overview Export page as PDF

Do you have any questions?

Write to us

Your Schwarzmüller contacts

Always close to you. We are here for you.

Search for a contact person

Premium customer service, too

From maintenance to rental vehicles

Read more

3-axle platform semitrailer for construction steel mats – transport3-axle platform semitrailer for construction steel mats - transport3-axle lightweight platform semitrailer - coil - inclined loader3-axle lightweight platform semitrailer – coil – inclined loade...