4-axle low-loader semitrailer with offset platform – reinforced – extendible
Product benefits and optional extras
- Drop deck with pull-out central frame, incremental adjustment with pneumatic locking
- Offset platform raised at the front incl. plug-in side walls
- Drop-deck loading platform with softwood floor and tubular posts in external frame
- Pull-out extensions, incl. extension planks for transporting wide loads
- Recessed foldable lashing rings on drop deck, and lashing points on external frame
- Third and fourth axles are steered trailing axles for improved cornering and lower tyre wear
- Pull-out/removable warning signs front and rear, incl. position and marker lights for wide loads
- Installation of axles from well-known manufacturers such as SAF or BPW
- OPTIONAL: Ramps with hydraulic lateral movement, operated on semitrailer
- OPTIONAL: Wheel recesses for transporting special vehicles
- OPTIONAL: 2-part loading ramps with motor-hydraulic ramp actuators
- OPTIONAL: Toolbox on offset platform
Vehicle details
TYPE DESIGNATION
- 4-AXLE LOW LOADER SEMITRAILER - REINFORCED - EXTENDIBLE
WEIGHTS
- Fifth-wheel load: 18,000 kg
- Axle load: 40,000 kg
- Total trailer weight/max. payload: 58,000 kg
FRAME
- Welded steel construction with tapered frame offset at front
- and drive-on taper at rear
- Drop deck with central frame extendible by approx. 2,000 mm,
- pneum. lockable at following intervals:
- 1st position at 600 mm
- 2nd position at 1,200 mm
- 3rd position at 1,700 mm
- 4th position at 2,000 mm
- With operation on trailer (without intermediate support)
- Replaceable 2" kingpin
- 2 folding supports at end of frame
- 5 pairs of mounting pockets on drop deck incl. tubular posts 100 x 50 x 5 mm,
- useful height approx. 1,000 mm, hot-dip galvanised
- 8 recessed lashing rings (6 on drop deck and 2 in front taper)
- 5 pairs of lashing points on external frame
- Rear recess for excavator dipper stick
- (length: approx. 2,600 mm, depth: 250 mm, width: 680 mm)
CHASSIS
- Air suspension with lifting and lowering device, for loading and unloading
- Air-sprung low-loader unit with low-maintenance axles.
- 4 x 10 t at 80 km/h, wheelbase 3 x 1,310 mm.
- S-cam brake 300/200 mm, autom. brake linkage adjuster.
- 1st and 2nd axles rigid,
- 3rd and 4th axles with steering knuckle = friction-steered trailing axle
- (20° steering angle) incl. electropneum. reverse gear interlock with switch operation
- in cab and additional operation on semitrailer.
- Tyres:
- 16 x 235/75 R 17.5 141J, manufacturer as per factory specifications
- 16 steel wheel rims 6.75 x 17.5, 10-hole, with rim offset, silver ex-works
SUPPORT FIXTURES
- Mechan. 24 t support jacks with single-sided operation, low-maintenance
BRAKE SYSTEM
- Two-line brake, configured for 40 t axle load
- EBS-E - electronic brake system (Wabco 4S3M = 1st + 3rd axles sensed)
- Spring-loaded parking brake on 1st + 2nd axle
- Steel air tank
FLOOR
- Softwood floor 50 mm, waterproofed, protruding beyond external frame profiles by approx.
- 5 mm at offset platform and 15 mm on drop deck, steel stud plate cover
- over rear wheels
EXTENSION
- Pull-out extensions, on both sides of drop deck and rear
- taper incl. continuous wooden boarding,
- extending parts hot-dip galvanised,
- 2 removable warning signs at both front (offset) and rear
RAMPS
- 2 foldable, 2-part loading ramps in special design with rope extension,
- width: 700 mm, length: approx. 2,600 + 1,500 mm,
- with hardwood flooring, for road finisher transport, approx. 10° incline,
- bracket on left ramp for revolving beacon, incl. light
- Ramp width adjustable (with rod),
- lockable in driving position using chains with turnbuckle
- Motor and manually operated hydr. ramp actuators via provided truck connection
- (for 2-pipe truck connection with plug-in coupling NW13, pressure on right in direction of travel, return on left), approx. 1 0 ° incline, with additional hand pump
ELECTRICAL EQUIPMENT
- Fully compliant with motor vehicle regulations - 24 V
- 2 five-chamber tail lights
- 2 clearance lamps at front
- 2 clearance/contour lights, extendible to 3,000 mm (1 at offset and 1 at rear)
- 1 x 2-pin socket at rear with revolving beacon and connecting cable
- for aforementioned light bracket
- Side marker lights
- 2 x 7-pin sockets at front
PAINTWORK
- Blasted with steel granulate, treated with zinc dust primer and spray painted
- 2-component acrylic paints for commercial vehicles (standard RAL colour)
ACCESSORIES
- Rear markings as per ECE standards
ATTACHMENTS
- 4 wheel chocks as per regulations (Â
WALLS/POSTS
- 70)
- Splashguards with spray protection
- Spare wheel well for 1 spare wheel
- Side impact protection
BRIDGE PLATFORM
- Plug-in tailboards on offset platform, 400 mm high,
- steel front wall
- 25 mm aluminium hollow profile walls at sides and rear,
- plug-in rear corner posts in tailboard height
Impressions
Loading ramps with hardwood flooring and welded square ribs
Third and fourth axles are steered trailing axles for improved cornering and lower tyre wear
4-axle low loader semitrailer - reinforced - extendible
Pull-out extensions incl. extension planks for transporting wide loads
Pull-out central frame, incremental adjustment with pneumatic locking
Recessed, folding, floor-mounted lashing eyes in the drop-deck section and lashing points in the external frame
Offset platform raised at the front, incl. plug-in side walls
OPTIONAL: Wheel recesses for transporting special vehicles
Your Schwarzmüller contacts
Always close to you. We are here for you.
Premium customer service, too
From maintenance to rental vehicles
Schwarzmüller Service App
Rely on our top services – also mobile. The app serves as a helper in an emergency in the event of a breakdown and is even available offline.
