Centre-axle BDF trailer chassis

  • Stop support at front, tiltable and relocatable
  • 4 guide rollers
  • Support beams with 4 container locks according to EN 284 (20 ft locking dimension)
  • For swap bodies C715 (approx. rear-flush) or C745 with set-down height of approx. 1,320 mm or 1,220 mm
  • Installation of axles from well-known manufacturers such as SAF or BPW
  • OPTIONAL: Pull-out drawbar (+/- 200 mm), adjustable with pneum. locking
  • OPTIONAL: 2 additional guide rollers = 6 in total

TYPE DESIGNATION

  • CENTRE-AXLE BDF TRAILER CHASSIS

WEIGHTS

  • Gross weight (perm.): 18 t Gross weight (techn.): 19 t with 1 t drawbar load Tare weight: approx. 3. 2 t

DIMENSIONS

  • For swap bodies C745 (approx. rear-flush) or C782, with set-down height of 1,220 mm and 1,320 mm Frame height, unladen - Driving position approx. 1,250 mm - Lowered approx. 1,170 mm - Raised approx. 1,390 mm

FRAME

  • Centre-axle welded steel construction with fixed drawbar and 50 mm drawbar eye for truck superstructure approx. 1,300 - 1,400 mm 2 outriggers with 4 container locks according to EN 284 (20 ft locking dimension) Stop support at front, tiltable and relocatable

CHASSIS

  • Air suspension with lifting and lowering device (lifting and lowering height approx. 220 mm) Automatic adjustment of driving level from 15 km/h air suspension unit with low-maintenance 430 mm disc brake axles, 2 x 9 t rigid Tyres : 4 x 385/65 R 22.5 160J, manufacturer as per factory specifications 4 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver

SUPPORT FIXTURES

  • 1 support jack with crank at front, manufacturer as per factory specifications 2 foldable support legs at rear

BRAKE SYSTEM

  • Brake system according to EC Directive 71/320 or ECE R13 Two-line brake EBS - electronic brake system Knorr 2S2M = 2nd axle sensed RSS - stability program Spring-loaded parking brake on 2nd axle Steel air tank

ELECTRICAL EQUIPMENT

  • 24 V lighting system according to EC Directive 76/756/EWG 2 seven-chamber tail lights in underride protection LED side marker lights 2 clearance lamps 2 contour lights on underride protection Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector

PAINTWORK

  • Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour) Plastic and hot-dip galvanised parts unpainted, powder-coated attachments/installation parts black Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48

ACCESSORIES

  • Rear markings as per ECE standards

ATTACHMENTS

  • Wheel chock(s) as per regulations 4 guide rollers Single wheel plastic mudguards with spray protection as per regulations Aluminium underride protection, coated white Side impact protection made from aluminium profiles as per regulations, coated black 1 spare wheel bracket for 1 spare wheel
back to the overview Export page as PDF

Do you have any questions?

Write to us

Your Schwarzmüller contacts

Always close to you. We are here for you.

Search for a contact person

Premium customer service, too

From maintenance to rental vehicles

Read more

2-axle BDF trailer chassis2-axle BDF trailer chassisSkid carrier tippableSkid carrier tippable