2-axle low-loader trailer with offset platform
Product benefits and optional extras
- Raised platform at the front incl. offset frame, tapered corners
- High point loading due to narrow cross member spacing
- 2 pairs of recessed foldable lashing rings
- 4 pairs of lashing points on external frame
- 2 open accessory compartments in raised platform at front
- Installation of axles from well-known manufacturers such as SAF or BPW
- OPTIONAL: Foldable, pivoting extensions, incl. extension planks for transporting wide loads
- OPTIONAL: Excavator shovel recess between side members at rear
- OPTIONAL: Offset drawbar with pivoting eye 40 + 50 mm
- OPTIONAL: 2-part loading ramps with motor-hydraulic ramp actuators
- OPTIONAL: Plug-in retaining rails
- OPTIONAL: Version with side walls on raised platform
Vehicle details
TYPE DESIGNATION
- 2-AXLE LOW LOADER TRAILER
WEIGHTS
- Gross weight (techn.): 20 t
- Payload: approx. 15.3 t
- Gross weight (perm.): 18 t
- Tare weight: approx. 4. 6 t
DIMENSIONS
- Approx. 2,100 mm raised platform at front incl. frame offset, tapered corners
- Approx. 4,500 mm = drop-deck platform - flat load surface
- Approx. 1,000 mm = rear access slope
- Total width: 2,550 mm
- Loading height, laden: approx. 870 mm
FRAME
- Welded steel construction with flat front frame offset or body offset
- and drive-on taper at rear
- 4 pairs of lashing points in external frame
- 2 pairs of recessed foldable 5 t lashing rings in floor (10 t techn. tensile strength)
CHASSIS
- Reinforced, maintenance-free parabolic springs
- Low-loader axles, each with 11 t axle load
- S-cam brake 300/200 mm, autom. brake linkage adjuster
- Tyres :
- 8 x 2 4 5/7 0 R 17.5 14 3 J, manufacturer as per factory specifications
- 8 steel wheel rims 6.75 x 17.5, 10-hole, with rim offset, silver
BRAKE SYSTEM
- Brake system according to EC Directive 71/320 or E CE R13
- Two-line brake
- EBS - electronic brake system
- Wabco 4S3M = both axles sensed
- Spring-loaded parking brake on 2nd axle
- Steel air tank
FLOOR
- Softwood floor 50 mm, waterproofed, protruding approx. 5 - 10 mm beyond frame
- profiles or beyond steel stud plate cover over rear wheels
RAMPS
- 2 foldable, 1-part loading ramps, approx. 2,800/710 mm, with hardwood flooring
- Ramp width manually adjustable by approx. 550 mm, with rod,
- (min. spacing approx. 295 mm up to max. total width of 2,815 mm)
- lockable in driving position using chains with turnbuckle
- 2 autom. folding supports at rear
- Lifting aid with coil spring
ELECTRICAL EQUIPMENT
- 24 V lighting system according to EC Directive 76/756/E WG
- 2 five-chamber tail lights on ramps
- LED side marker lights
- 2 clearance lamps
- 2 contour lights
- Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector
PAINTWORK
- Blasted with steel granulate, treated with zinc dust primer and spray painted
- 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
- Plastic and hot-dip galvanised parts (extensions etc.) unpainted,
- powder-coated attachments/installation parts and drawbar black
- Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48
ACCESSORIES
- Rear markings as per ECE standards
ATTACHMENTS
- Wheel chock(s) as per regulations
- Plastic mudguards or splashguards with spray protection as per regulations
- Side impact protection
- Spare wheel well for 1 spare wheel
- 2 open accessory compartments in raised platform at front
- Externally welded square ribs on ramps and rear access slope
- Centre of gravity marking
DRAWGEAR
- Fixed drawbar, 1,800 mm long, 40 mm drawbar eye, 5° angle,
- with silent bushing
- truck superstructure up to 500 mm
- Truck coupling height, unladen: approx. 850 - 900 mm
Impressions
2-axle low loader trailer with offset platform
Front offset platform with accessory compartments - OPTIONAL: Accessory compartments with lids and pull-out warning signs for transporting wide loads
Bogie at front incl. drawbar - OPTIONAL: Pull-out warning signs for transporting wide loads
2 folding single-part loading ramps with hardwood flooring
OPTIONAL: Foldable, pivoting extensions, incl. extension planks for transporting wide loads
OPTIONAL: Excavator shovel recess between side members at rear
2 pairs of recessed, foldable lashing eyes on the platform
Offset drawbar with pivoting eye, 40 + 50 mm
Your Schwarzmüller contacts
Always close to you. We are here for you.
Premium customer service, too
From maintenance to rental vehicles
Schwarzmüller Service App
Rely on our top services – also mobile. The app serves as a helper in an emergency in the event of a breakdown and is even available offline.
