2-axle BDF trailer chassis
Product benefits and optional extras
- Stop support at front, tiltable and relocatable
- 4 guide rollers
- Support beams with 4 container locks according to EN 284 (20 ft locking dimension)
- For swap bodies C715 (approx. rear-flush) or C745 with set-down height of 1,320 or 1,220 mm
- Installation of axles from well-known manufacturers such as SAF or BPW
- OPTIONAL: Pull-out drawbar, max. 600 mm adjustment, with Getofix drawbar support
- OPTIONAL: 2 additional guide rollers = 6 in total
Vehicle details
TYPE DESIGNATION
- 2-AXLE "BDF" TRAILER CHASSIS
WEIGHTS
- Gross weight (techn./perm.): 18 t
- Tare weight: approx. 2. 5 t
DIMENSIONS
- For swap bodies C715 (approx. rear-flush) or C745
- Set-down height of 1,320 mm or 1,220 mm on even ground
- Frame height, unladen
- - Driving position approx. 1,260 mm
- - Lowered approx. 1,180 mm
- - Raised approx. 1,400 mm
FRAME
- Welded steel construction
- 2 side members with front and rear outriggers
- 4 container locks according to EN 284 (20 ft locking dimension)
- Stop support at front, tiltable and relocatable
- Low-maintenance ball bearing turntable
CHASSIS
- Air suspension with lifting and lowering device
- (total lifting and lowering height approx. 220 mm)
- Automatic adjustment of driving level from 15 km/h
- Air-sprung axles with low-maintenance 430 mm disc brakes
- each with 9 t axle load
- Tyres :
- 4 x 385/65 R 22.5 160J, manufacturer as per factory specifications
- 4 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver
BRAKE SYSTEM
- Brake system according to EC Directive 71/320 or ECE R13
- Two-line brake
- EBS - electronic brake system
- Wabco 4S3M = both axles sensed
- RSS - stability program
- Spring-loaded parking brake on 2nd axle
- Steel air tank
ELECTRICAL EQUIPMENT
- 24 V lighting system according to EC Directive 76/756/EWG
- 2 seven-chamber tail lights in underride protection
- LED side marker lights
- 2 clearance lamps
- 2 contour lights on underride protection
- Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector
PAINTWORK
- Blasted with steel granulate, treated with zinc dust primer and spray painted
- 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
- Plastic and hot-dip galvanised parts unpainted,
- powder-coated attachments/installation parts black
- Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48
ACCESSORIES
- Rear markings as per ECE standards
ATTACHMENTS
- Wheel chock(s) as per regulations
- 4 guide rollers
- Plastic mudguards with spray protection as per regulations
- Aluminium underride protection, coated white
- Side impact protection made from aluminium profiles as per regulations, coated black
- Optional:
- 1 spare wheel bracket
DRAWGEAR
- Fixed drawbar, 2,300 mm long , 40 mm drawbar eye (for truck superstructure up to 350 mm) with silent bushing and drawbar locking device
Impressions
2-axle BDF trailer chassis
Bogie with front arm
Underride protection incl. integrated light system
Pull-out drawbar, max. 600 mm adjustment, with Getofix drawbar support
Stop support at front, tiltable and relocatable
Guide rollers
Support cross member incl. container lock in accordance with EN 284
Brake and release valve fitted to the side of the vehicle for convenient operation
Your Schwarzmüller contacts
Always close to you. We are here for you.
Premium customer service, too
From maintenance to rental vehicles
Schwarzmüller Service App
Rely on our top services – also mobile. The app serves as a helper in an emergency in the event of a breakdown and is even available offline.
