Centre-axle BDF low loader trailer chassis

Product benefits

  • Stop support at front, tiltable and relocatable
  • 4 guide rollers
  • Support beams with 4 container locks according to EN 284 (20 ft locking dimension)
  • For swap bodies C715 (approx. rear-flush) or C745 with set-down height of approx. 960 to 1,050 mm
  • Installation of axles from well-known manufacturers such as BPW, Mercedes or SAF
  • OPTIONAL: Pull-out drawbar (+/- 200 mm), adjustable with pneum. locking
  • OPTIONAL: 2 additional guide rollers = 6 in total
  • OPTIONAL: Extended stroke = additional lifting and lowering height

Product details



CENTRE-AXLE BDF LOW LOADER TRAILER CHASSIS



Weights


Gross weight (perm.): 18 t
Gross weight (techn.): 19 t with 1 t drawbar load
Tare weight: approx. 3. 2 t

Dimensions


For swap bodies C745 (approx. rear-flush) or C782,
with set-down height of approx. 870 - 960 mm

Frame height, unladen
- Driving position approx. 910 mm
- Lowered approx. 840 mm
- Raised approx. 1,040 mm

Frame


Centre-axle welded steel construction with fixed drawbar and 50 mm drawbar eye
for truck superstructure approx. 1,300 - 1,400 mm
2 outriggers with 4 container locks according to EN 284 (20 ft locking dimension)
Stop support at front, tiltable and relocatable

Chassis


Air suspension with lifting and lowering device
(lifting and lowering height approx. 200 mm)
Automatic adjustment of driving level from 15 km/h

Low-maintenance air-sprung low-loader axles, 2 x 9 t rigid
S-cam brake 300/200 mm, autom. brake linkage adjuster

Tyres :
8 x 235/75 R 17.5 141J, manufacturer as per factory specifications
8 steel wheel rims, 10-hole, with rim offset, silver

Support fixtures


1 support jack with crank at front, manufacturer as per factory specifications
2 foldable support legs at rear

Brake system


Brake system according to EC Directive 71/320 or ECE R13
Two-line brake
EBS - electronic brake system
Knorr 2S2M = 2nd axle sensed
RSS - stability program
Spring-loaded parking brake on 2nd axle
Steel air tank

Electrical equipment


24 V lighting system according to EC Directive 76/756/EWG
2 seven-chamber tail lights in underride protection
LED side marker lights
2 clearance lamps
2 contour lights on underride protection
Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector

Paintwork


Blasted with steel granulate, treated with zinc dust primer and spray painted
2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

Plastic and hot-dip galvanised parts unpainted,
powder-coated attachments/installation parts black

Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48

Accessories


Rear markings as per ECE standards

Attachments


Wheel chock(s) as per regulations
4 guide rollers
Single wheel plastic mudguards with spray protection as per regulations
Aluminium underride protection, coated white
Side impact protection made from aluminium profiles as per regulations, coated black
1 spare wheel bracket for 1 spare wheel