Aluminium box body - up to 12 t total weight

Product benefits

  • Sealed aluminium box body with clamping posts, available in different lengths
  • Side walls and front wall panelled inside with 6 mm plywood board
  • Resin-coated plywood floor, 27 mm (for stacker axle loads up to 2 t)
  • Steel skirting provides impact protection at front and on both sides
  • Full-length combination lashing rail made from galvanised steel and bolted on both sides
  • GRP roof, translucent
  • Clamped/bolted subframe and cross members, hot-dip galvanised
  • OPTIONAL: Vertical liftgate with upper extending flap, for distribution transport
  • OPTIONAL: Needle felt lining on front wall and side wall, for furniture transport
  • OPTIONAL: Single-leaf side door
  • OPTIONAL: Aluminium panel roof
  • OPTIONAL: Retractable steps at rear

Product details



ALUMINIUM BOX BODY - up to 12 t total weight

Weights


Body weight: approx. 1.4 t

Dimensions


Internal length: approx. 6,100 mm
Internal width: approx. 2,475 mm
Total width: 2,550 mm

Internal height: approx. 2,410 mm
Portal loading height: approx. 2,345 mm
Portal loading width: approx. 2,420 mm

Load space internal height, body height, loading height, total height etc. can only be checked
and announced upon specification of the exact truck data

Frame


Bolted steel construction, with attached cross members,
design height approx. 210 mm, cross member spacing approx. 500 mm

Floor


Resin-coated birch plywood floor, 27 mm, flush with external frame
(floor load capacity up to 2 t stacker axle load)

Box body


Closed aluminium box body with clamping posts, spacing approx. 600 mm

Side walls and front wall panelled with 6 mm plywood board
Steel skirting, 275 mm high = impact protection at front and on both sides

On both sides 1 row of full-length combination lashing rails made from galvanised steel and bolted, distance from floor to centre of lashing rail :
approx. 950 mm, protruding approx. 5 mm over interior panelling

GRP roof, translucent - bow spacing approx. 600 mm

Rear steel portal frame with fully opening aluminium double door,
2 external espagnolettes per door leaf,
interior door cladding made from galvanised steel plate
Suitable for customs sealing

Box lighting with 2 recessed interior roof lights,
incl. switch operation in cab (power supply must be present)

External clearance lamps at front and rear at top

Paintwork


Subframe, cross members and steel rear portal hot-dip galvanised - unpainted
Complete box body incl. portal doors etc. = white (as per upstream supplier)
Plastic and hot-dip galvanised parts unpainted,
powder-coated attachments/installation parts black

Reflective contour marking strips across entire length of sides (continuing onto truck cab) and all-round contour marking at rear
(white on sides and red at rear by default), according to ECE 48

Accessories


Rear markings as per ECE standards (horizontal on rear doors/rear wall)

Attachments


Rear crash guard
1 x retractable step unit at rear right
Bracket for wheel chock(s)