3-axle platform semitrailer - building materials

Product benefits

  • Reinforced frame construction for 20 t point load over 4 m at centre of gravity
  • Reinforced aluminium hollow profile front wall with integrated equipment bracket
  • Aluminium hollow profile rear wall, internally riveted frame, foldable, with Kinnegrip double locking
  • Aluminium hollow profile side walls, with Kinnegrip double locking
  • Installation of axles from well-known manufacturers such as BPW, Mercedes or SAF
  • OPTIONAL: Cement cover consisting of roof arches inserted directly into the central and rear corner posts
  • OPTIONAL: RULASI = post-based load securing system with various rack positions
  • OPTIONAL: Reinforced body with load securing certified according to DIN EN 12642 Code XL
  • OPTIONAL: Weather-resistant larch or hardwood floor, 40 mm, lengthwise, without secondary floor
  • OPTIONAL: Anodised aluminium stacker protection strips on both sides of external frame
  • OPTIONAL: Perforated external frame with approx. 100 mm hole spacing, 50/30 mm slot, for securing 2 t per lashing point

Product details



3-AXLE PLATFORM SEMITRAILER RH125 P - building materials



Weights


Gross train weight (perm.): 40 t
Gross weight (techn.): 39 t
Axle assembly load (techn.): 27 t
Fifth-wheel load (techn.): 12 t
Tare weight: approx. 5. 6 t

Dimensions


Internal platform length: approx. 13,620 mm
Internal platform width: approx. 2,480 mm
Total width: 2,550 mm
Loading height: approx. 125 mm over fifth-wheel height

Frame


Welded steel frame construction, reinforced for 2 0 t point load
over 4 m at centre of mass
Frame for unladen fifth-wheel height of 1,150 - 1,220 mm with air-sprung STT
Replaceable 2" kingpin (EC installation dimension,
width across corners: 2,040 mm)
23 pairs of recessed 2.5 t lashing points according to UVV

Chassis


Air suspension with lifting and lowering device (approx. +120/-80 mm)
Automatic adjustment of driving level from 15 km/h

Air suspension unit with low-maintenance 430 mm disc brake axles,
3 x 9 t rigid, wheelbase 2 x 1,310 mm

Tyres :
6 x 385/65 R 22.5 160J, manufacturer as per factory specifications
6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver

Support fixtures


Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation, manufacturer as per factory specifications

Brake system


Brake system according to EC Directive 71/320 or ECE R13
Two-line brake
EBS - electronic brake system
Wabco 2S2M = one axle sensed
RSS - stability program
Spring-loaded parking brake on 2 axles
Steel air tank

Floor


Reinforced body design in accordance with DIN EN 12642 Code XL load securing certificate
Resin-coated plywood floor, 27 mm, flush with external frame
2 steel top-hat rails over the longitudinal beams
(floor load capacity 7 t, stacker axle load according to CSC)

Side walls


Fixed aluminium hollow profile front wall, 1,200 mm, with 2 centre supports,
2 lashing rings inside for load securing
Front wall reinforced inside with galvanised steel plate,
approx. 650 mm high

4-part aluminium hollow profile side walls, 1,000/25 mm, with vertical and horizontal rubber seal and internally riveted frame, foldable with Kinnegrip double locking
Foldable aluminium hollow profile rear wall, 1,000 mm high, with vertical and horizontal rubber seal and internally riveted frame,
foldable with Kinnegrip double locking
2 folding steps

Posts


Integrated extended lever locks, Kinnegrip system
2 front corner posts, bolted, protruding from sides, in front wall height
6 Kinnegrip centre posts, foldable and removable, in side wall height
2 rear Kinnegrip corner posts, foldable and removable, side-mounted, in side wall height

Electrical equipment


24 V lighting system according to EC Directive 76/756/EWG
2 seven-chamber tail lights in underride protection
LED side marker lights
2 clearance lamps
2 contour lights on underride protection
2 x 7-pin and 1 x 15-pin socket

Paintwork


Blasted with steel granulate, treated with zinc dust primer and spray painted with 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

Plastic and hot-dip galvanised parts unpainted,
powder-coated attachments/installation parts black

Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

Accessories


Rear markings as per ECE standards (horizontal on rear doors/rear wall)

Attachments


Aluminium crash guard across rear
Wheel chock(s) as per regulations
Single wheel plastic mudguards with spray protection as per regulations
Aluminium underride protection, coated white
Side impact protection made from aluminium profiles as per regulations, coated black
1 spare wheel bracket for 1 spare wheel (rear right)
1 plastic toolbox, lockable, unpainted , on left after axle

Product impressions