2-axle platform trailer - building materials

Product benefits

  • Reinforced frame construction for 14 t point load over 3 m at centre of gravity
  • Fixed aluminium hollow profile front wall with 2 full-height centre supports
  • Aluminium hollow profile rear wall, internally riveted frame, foldable, with Kinnegrip double locking
  • Double floor consisting of subfloor with integrated steel omega profiles beneath resin-coated wear floor (stacker axle load: 5,460 kg)
  • Aluminium hollow profile side walls, 1,000/25 mm, with Kinnegrip double locking
  • Installation of axles from well-known manufacturers such as BPW, Mercedes or SAF
  • OPTIONAL: Smooth steel plate floor or steel stud plate floor, tack-welded to external frame
  • OPTIONAL: Perforated external frame with approx. 100 mm hole spacing, 50/30 mm slot, for securing 2 t per lashing point
  • OPTIONAL: Reinforced body with load securing certified according to DIN EN 12642 Code XL
  • OPTIONAL: Weather-resistant larch or hardwood floor, 40 mm, with top-hat profile over side members, without secondary floor
  • OPTIONAL: Cement cover consisting of roof arches inserted directly into the central and rear corner posts
  • OPTIONAL: Pull-out drawbar, max. 600 mm adjustment, with Getofix drawbar support

Product details



2-AXLE PLATFORM TRAILER - building materials



Weights


Gross weight (techn.): 18 t
Tare weight: approx. 3. 6 t

Dimensions


Internal platform length: approx. 7,100 mm
Internal platform width: approx. 2,480 mm
Total width: 2,550 mm
Loading height, unladen approx. 1, 35 0 mm,
clearance between tyres and frame at front approx. 13 0 mm
Frame height at front approx. 1 60 mm

Frame


Welded steel frame construction, reinforced for 14 t point load
over 3 m at centre of mass
15 pairs of recessed lashing points according to UVV

Chassis


Air suspension without lifting and lowering device

Low-maintenance air-sprung axles with 430 mm disc brakes,
each with 9 t axle load

Tyres:
4 x 385/65 R 22.5 160J, manufacturer as per factory specifications
4 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver

Drawgear


Fixed drawbar, 2,000 mm long , 40 mm drawbar eye (spacing approx. 1,750 mm - for truck superstructure approx. 0 mm) with silent bushing

Brake system


Brake system according to EC Directive 71/320 or ECE R13
Two-line brake
EBS - electronic brake system
Wabco 4S3M = both axles sensed
RSS - stability program
Spring-loaded parking brake on 2nd axle
Steel air tank

Floor


Spruce subfloor, 30 mm, lengthwise
Galvanised steel omega profiles in subfloor
Secondary floor made from resin-coated birch plywood, 9 mm, flush with external frame
(floor load capacity: 5,460 kg stacker axle load acc. to CSC)

Side walls


Fixed aluminium hollow profile front wall, 1,200 mm, with 2 full-height centre supports
Front wall reinforced inside with 3/5 mm aluminium chequer plate, approx. 650 mm high

2-part aluminium hollow profile side walls, 1,000/25 mm, with vertical and horizontal rubber seal and internally riveted frame, with Kinnegrip double locking
Foldable aluminium hollow profile rear wall, 1,000 mm high, with vertical and horizontal rubber seal and internally riveted frame, with Kinnegrip double locking
2 folding steps

Posts


Integrated extended lever locks, Kinnegrip system
2 front corner posts, bolted to front, in front wall height
2 Kinnegrip centre posts, foldable and removable, in side wall height
2 rear Kinnegrip corner posts, foldable and removable, side-mounted, in side wall height

Electrical equipment


24 V lighting system according to EC Directive 76/756/EWG
2 seven-chamber tail lights in underride protection
LED side marker lights
2 clearance lamps
2 contour lights on underride protection
Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector

Paintwork


Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

Plastic and hot-dip galvanised parts unpainted,
powder-coated attachments/installation parts black

Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

Accessories


Rear markings as per ECE standards

Attachments


Rear crash guard
Side wall stop buffer
Wheel chock(s) as per regulations
Single wheel plastic mudguards with spray protection as per regulations
Aluminium underride protection, coated white
Side impact protection made from aluminium profiles as per regulations, coated black
1 spare wheel bracket for 1 spare wheel
Peg for tarpaulin below external frame

Product impressions